1994 AM General Hummer recalls
The 1994 AM General Hummer is affected by 3 safety recall campaigns in NHTSA's records.
At a glance
- Recall campaigns
- 3
- Most recent
- March 12, 1996
Source: NHTSA recall records
Recall campaigns
| Campaign | Reported | Part | Problem | Vehicles |
|---|---|---|---|---|
| 96V-049 | March 12, 1996 | Vehicle speed control (accelerator pedal) | The coating used to protect the accelerator pedal shaft is incompatible with the bronze bushing through which the shaft passes. Over time, and in the presence of a corrosive environment (water, road salt), the shaft can corrode inside the bushing increasing the amount of friction between the rotating shaft and the⦠| 3,000 |
| 95V-023 | February 13, 1995 | Vehicle speed control | Water can accumulate in the cruise control cable and if the outside temperature is below freezing and the cruise control is engaged, the water can freeze causing the cable to bind and not release as intended when the brake pedal is applied or the system is turned off at the master cruise control switch. | 150 |
| 94V-164 | September 1, 1994 | Fuel system, gasoline (delivery, hoses, lines/piping, and fittings) | The oil pressure switch which controls the power to the electric fuel pump can fail. Failure is due to a missing rubber seal between the switch and the wiring harness. The missing seal allows contaminants to enter the switch causing it to fail in the open or closed position. | 2,300 |