1996 Chrysler Sebring recalls
The 1996 Chrysler Sebring is affected by 7 safety recall campaigns in NHTSA's records.
At a glance
- Recall campaigns
- 7
- Most recent
- July 8, 2002
Source: NHTSA recall records
Recall campaigns
| Campaign | Reported | Part | Problem | Vehicles |
|---|---|---|---|---|
| 02V-186 | July 8, 2002 | Vehicle speed control | On certain passenger vehicles equipped with 2.5l v6 engines, the throttle control cable can fray causing the throttle to bind or stick. | 88,000 |
| 00V-421 | December 18, 2000 | Suspension (front, control arm, lower ball joint) | Vehicle description: passenger vehicles. If the rubber boots on the lower lateral arm ball joints of the front suspension were damaged during assembly, dirt and water can intrude. Also, mmc has added the potential of leaking moisture, which can cause the ball stud to corrode. | 393,796 |
| 99V-066 | April 5, 1999 | Suspension (front, control arm, lower ball joint) | Vehicle description: passenger vehicles. If the rubber boots on the lower lateral arm ball joints of the front suspension were damaged during assembly, dirt and water can intrude. | 165,857 |
| 98V-183 | August 6, 1998 | Power train (automatic transmission, park/neutral start interlock switch) | Vehicle description: passenger vehicles equipped with automatic transmissions. The adjustment of the cable connecting the console shifter mechanism to the ignition key can cause a trapped key condition which can result in a low force required to depress the shift button. A combination of applying a mis-adjusted… | 685,000 |
| 97V-201 | November 13, 1997 | Suspension (front, control arm, lower ball joint) | Vehicle description: passenger vehicles. The lower control arm ball joint can separate due to loss of lubrication. | 599,000 |
| 97V-015 | February 10, 1997 | Visibility (rearview mirrors/devices) | The electrical contacts in the power mirror switch can accumulate road salt due to water entering into the switch. | 39,000 |
| 96V-123 | July 2, 1996 | Service brakes, hydraulic (power assist) | The power brake booster vacuum hose was improperly installed on the intake manifold vacuum nipple. | 22,500 |