1995 Pontiac Sunfire recalls
The 1995 Pontiac Sunfire is affected by 5 safety recall campaigns in NHTSA's records.
At a glance
- Recall campaigns
- 5
- Most recent
- March 6, 2002
Source: NHTSA recall records
Recall campaigns
| Campaign | Reported | Part | Problem | Vehicles |
|---|---|---|---|---|
| 02V-070 | March 6, 2002 | Electrical system (ignition, switch) | On certain passenger vehicles. If the engine fails to start and the driver holds the key in the "start" position for an extended period, high current flows through the ignition switch, and sometimes produces enough heat to melt internal switch parts. | 1,589,948 |
| 96V-250 | December 17, 1996 | Exterior lighting (hazard flashing warning lights) | The front and/or rear hazard warning lamps (four-way flashers) do not flash when the hazard switch is activated. This fails to comply with fmvss no. 108, "lamps, reflective devices, and associated equipment." | 270,014 |
| 96V-003 | January 2, 1996 | Power train (automatic transmission, gear position indication (prndl)) | The instrument panel cluster trim plate/bezel can sag and cover the light emitting diode portion (lighted pointed above panel) of the transaxle shift indicator display. This does not comply with fmvss no. 101, "control location, identification, and illumination." | 28,068 |
| 95V-141 | July 26, 1995 | Structure (frame and members) | Some welds were omitted from the body lock pillar, or "b" pillar. This does not comply with fmvss no.208, "occupant crash protection." | 16 |
| 95V-025 | February 16, 1995 | Suspension (front, control arm, lower arm) | These vehicles have been built with welds missing from the front suspension lower control arm assemblies causing excessive loads on the existing welds. | 21,340 |