1992 BMW 318 recalls
The 1992 BMW 318 is affected by 4 safety recall campaigns in NHTSA's records.
At a glance
- Recall campaigns
- 4
- Most recent
- April 11, 1994
Source: NHTSA recall records
Recall campaigns
| Campaign | Reported | Part | Problem | Vehicles |
|---|---|---|---|---|
| 94V-066 | April 11, 1994 | Fuel system, gasoline (delivery, hoses, lines/piping, and fittings) | Feed fuel hoses can harden and "set" over time, allowing a seepage of fuel at the connection between the hose and the engine fitting. The clamp used to hold the hose to the fitting is unable to compensate for the hardening of the feed fuel hose. | 116,300 |
| 94V-037 | February 17, 1994 | Fuel system, gasoline (fuel injection system) | The adhesive material of the two piece throttle body heater migrates into the circulation chamber causing build up of impurities and restriction of flow within the chamber. This condition and water vapors from the crank that freezes at low ambient air temperatures prevents the throttle plate from closing as the driver… | 23,500 |
| 93V-015 | February 1, 1993 | Visibility (defroster/defogger/hvac system, heater core) | The malfunction or failure of a coolant system component results in significantly increased coolant temperature and a resulting increase in system pressure. | 375,000 |
| 91V-219 | December 17, 1991 | Vehicle speed control | The crankcase ventilation system, vented into the intake tract of the engine at the bellows boot ahead of the throttle housing, allows warm water vapor from the crankcase vent to condense and freeze in the colder bellows boot when the ambient air temperature is 15 degrees fahrenheit or less. The build up of ice can… | 15,200 |