2002 BMW 330I recalls
The 2002 BMW 330I is affected by 6 safety recall campaigns in NHTSA's records.
At a glance
- Recall campaigns
- 6
- Most recent
- January 15, 2020
Source: NHTSA recall records
Recall campaigns
| Campaign | Reported | Part | Problem | Vehicles |
|---|---|---|---|---|
| 20V-018 | January 15, 2020 | Air bags (frontal, passenger side, inflator module) | BMW of North America, LLC (BMW) is recalling certain 2000-2005 323iT, 325iT, 325xiT, 320i, 323i, 325i, 325xi, 328i, 330i and 330xi and 2000-2006 323Ci, 325Ci, 328Ci, 330Ci, M3 Coupe, 323Cic, 325Cic, 330Cic, and M3 Convertible vehicles equipped with non-desiccated frontal Takata PSAN inflators and PSPI passenger… | 292,948 |
| 14V-428 | June 11, 2018 | Air bags | BMW of North America, LLC (BMW) is recalling certain model year 2000 323i sedans, coupes, convertibles, and Sports Wagons; 2000 328i sedans and coupes; 2001-2005 325i sedans, coupes, convertibles, and Sport Wagons; 2001-2005 325xi sedans and Sports Wagons; 2006 325i coupes and convertibles; 2001-2006 330i sedans… | 574,007 |
| 15V-318 | May 28, 2015 | Air bags (frontal, driver side, inflator module) | BMW of North America, LLC (BMW) is recalling certain model year 2002-2005 325i, 325xi, 330i, and 330xi Sedans, and 325xi and 325i Sportswagons, 2002-2006 330Ci, 325Ci, and M3 Convertibles and 325i, 330i, and M3 Coupes, 2002-2003 M5, 540i, 525i Sedan, and 530i Sedans, and 540i and 525i Sportswagons, and 2003 X5 3.0i… | 419,235 |
| 13V-172 | May 2, 2013 | Air bags | BMW is recalling certain model year 2002-2003 325i, 325xi, 330i, 330xi sedans; 325Ci and 330Ci coupes and convertibles; 325iT and 325xiT Sports Wagons; and M3 coupes and convertibles to address a safety defect in the passenger side frontal air bag which may produce excessive internal pressure causing the inflator to… | 43,204 |
| 11V-438 | August 26, 2011 | Exterior lighting (turn signal) | BMW is recalling certain model year 2002-2005 325I, 325xi, 330I, and 330xi vehicles manufactured from september 1, 2001, through march 1, 2005. Over time, resistance in the electrical contacts may cause one or more rear lamp functions (tail light, brake light, and/or turn-signal), within the vehicle's body panel, to… | 241,000 |
| 02V-057 | February 19, 2002 | Suspension | On certain passenger vehicles, during the strut mount manufacturing process, the thrust bearing was not properly positions and secured. If the suspension is fully unloaded, the front strut could separate from the upper mount. | 4,672 |