2000 Dodge Ram recalls
The 2000 Dodge Ram is affected by 6 safety recall campaigns in NHTSA's records.
At a glance
- Recall campaigns
- 6
- Most recent
- April 12, 2004
Source: NHTSA recall records
Recall campaigns
| Campaign | Reported | Part | Problem | Vehicles |
|---|---|---|---|---|
| 04V-185 | April 12, 2004 | Service brakes, hydraulic (antilock/traction control/electronic limited slip, control unit/module) | On certain van and wagon vehicles equipped with 4-wheel antilock brake systems (ABS), aftermarket batteries may leak electrolyte onto the ABS control module connector, which can compromise sealing integrity of the connector. | 44,588 |
| 01V-253 | August 2, 2001 | Electrical system (wiring) | Vehicle description: vans and wagons not equipped with power front seats. In the presence of road salt, water, and possibly other debris, the power seat connector located beneath the driver's seat could develop a high resistive short circuit that cycles the circuit breaker. | 98,000 |
| 01V-153 | May 8, 2001 | Air bags | Vehicle description: pickup trucks. Sound deadener material inside the steering wheel could become detached from the cover and housing. Note: the ram pickup trucks were built at the warren assembly plant ("s" in the 11th VIN position) from may 16, 2000 through october 23, 2000; st. Louis north assembly plant ("j" in… | 216,100 |
| 01V-038 | February 12, 2001 | Service brakes, hydraulic (foundation components, hoses, lines/piping, and fittings) | Vehicle description: pickup trucks equipped with an anti-lock braking system (ABS). Some vehicles may have inadequate clearance between the front tire/wheel and the brake hose/abs sensor wire assembly. During full lock turns, it is possible for the tire or wheel to contact the brake hose/abs sensor wire assembly. | 2,000 |
| 00V-107 | April 11, 2000 | Trailer hitches | Vehicle description: pickup trucks equipped with optional trailer hitch. The trailer hitch side brackets were manufactured using material with insufficient strength. | 357,000 |
| 00V-007 | January 11, 2000 | Suspension (front, control arm, lower arm) | Vehicle description: light duty pickup trucks. The welds at the right side lower control arm bracket to axle tube attachment may have inadequate fatigue life due to poor weld quality. This can lead to separation of the control arm bracket from the axle tube. | 76 |