1995 Ford Contour recalls
The 1995 Ford Contour is affected by 8 safety recall campaigns in NHTSA's records.
At a glance
- Recall campaigns
- 8
- Most recent
- November 6, 2000
Source: NHTSA recall records
Recall campaigns
| Campaign | Reported | Part | Problem | Vehicles |
|---|---|---|---|---|
| 00V-367 | November 6, 2000 | Engine and engine cooling | Vehicle description: 1995 passenger vehicles equipped with the 2.0l and 2.5l engines, and 1996 vehicles equipped with 2.5l engines. Tightening of the engine cooling fan motor bearings, up to and including motor stall, can result in increased motor torque and higher than normal motor current and accompanying high motor… | 262,559 |
| 98V-233 | September 18, 1998 | Power train (automatic transmission, lever and linkage, floor shift) | Vehicle description: passenger vehicles. The floor shift automatic transmission control can be damaged if subjected to certain interior cleaning products. The gear position indicator can deteriorate and not correctly indicate the actual gear position. | 175,000 |
| 97V-225 | December 8, 1997 | Vehicle speed control (cables) | Vehicle description: passenger vehicles equipped with the traction control option. The throttle cables were damaged during vehicle assembly leading to fraying or separation of the throttle cable. | 38,000 |
| 95V-232 | December 5, 1995 | Fuel system, gasoline (storage, tank assembly, filler pipe and cap) | The fuel tank filler pipe opening reinforcement, constructed from two separately molded pieces, can leak at the weld. | 167,784 |
| 95V-228 | December 4, 1995 | Seat belts (front, anchorage) | Cracks have been found in the front safety belt outboard anchor tabs due to a combination of hydrogen embrittlement of the tab and stress introduced during attachment of the anchor tab to the seat frame. This does not conform with the requirements of fmvss no. 210, "seat belt assembly anchorages." | 229,500 |
| 95V-009 | January 24, 1995 | Visibility (windshield) | The glass tempering process on the right hand rear door windows was not correctly performed. This does not meet the requirements of fmvss no. 205, "glazing materials." | 2,512 |
| 94V-203 | October 18, 1994 | Fuel system, gasoline (storage, tank assembly, filler pipe and cap) | The fuel tank filler pipe opening reinforcement can leak at the weld. | 28,500 |
| 94V-184 | September 29, 1994 | Fuel system, gasoline (storage, tank assembly, filler pipe and cap) | A metal shield on the outside of the plastic fuel filler pipe can develop a static electrical charge during refueling of the vehicle. | 8,000 |