1995 Ford Mustang recalls
The 1995 Ford Mustang is affected by 5 safety recall campaigns in NHTSA's records.
At a glance
- Recall campaigns
- 5
- Most recent
- December 21, 2001
Source: NHTSA recall records
Recall campaigns
| Campaign | Reported | Part | Problem | Vehicles |
|---|---|---|---|---|
| 01V-390 | December 21, 2001 | Engine and engine cooling (cooling system, fan) | Vehicle description: taurus/sable vehicles equipped with 3.0l and 3.8l engines and mustang vehicles with 3.8l and 5.0l engines. It is possible for the engine cooling fan bearing to seize. | 695,260 |
| 01V-318 | October 3, 2001 | Air bags (frontal, driver side, inflator module) | Equipment description: passenger vehicles that have had the driver's air bag module replaced after april 5, 2000. The replacement driver's air bag module inflator may have insufficient welds that could prevent proper inflation of the air bag. | 911 |
| 00V-349 | October 30, 2000 | Parking brake (conventional) | Vehicle description: passenger vehicles equipped with manual transmissions. If a vehicle is parked with the parking brake not fully applied and not in first gear, as directed in the owner guide, and the self adjustment pawl subsequently skips one or two teeth, the vehicle could move on some grades. | 434,000 |
| 97V-180 | October 20, 1997 | Structure (body, hood) | Vehicle description: passenger vehicles and mini vans. Tearing of the bond between the inner and outer hood panels during minor front end collisions can result in a gap at the leading edge of the hood. Air forced between the inner and outer panels can produce enough pressure to force the outer panel upward. | 769,000 |
| 95V-134 | July 17, 1995 | Steering (linkages, tie rod assembly) | The affected vehicles were built with outer tie rod ends with incorrect taper ball studs. The incorrect tapered ball studs can fracture within 50,000 miles. | 1,300 |