2001 Nissan Sentra recalls
The 2001 Nissan Sentra is affected by 7 safety recall campaigns in NHTSA's records.
At a glance
- Recall campaigns
- 7
- Most recent
- December 10, 2003
Source: NHTSA recall records
Recall campaigns
| Campaign | Reported | Part | Problem | Vehicles |
|---|---|---|---|---|
| 03V-511 | December 10, 2003 | Engine and engine cooling | On certain electric vehicles, the front suspension transverse link's ball joint bracket may break from stress concentration at a notch created by surface roughness and the shape of the material cut-line. | 70 |
| 03V-455 | November 17, 2003 | Engine and engine cooling | On certain passenger vehicles, the circuit board for the crank position sensor or cam position sensor may have an improper solder joint due to solder deformation caused by heat stress accelerated by the existence of flux residue during the soldering process. | 630,000 |
| 03V-477 | November 14, 2003 | Electrical system (ignition, module) | On certain passenger vehicles equipped with the qg18de engine or qr25de engines, the foam material used for the interior lining of the electronic control module (ECM) box emits sulfur as it cures. | 276,000 |
| 01V-376 | December 12, 2001 | Exterior lighting (headlights) | Vehicle description: certain passenger vehicles fail to comply with requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these vehicles were missing tamperproof caps that prevent horizontal headlamp adjustment. | 81,393 |
| 01V-357 | November 16, 2001 | Engine and engine cooling (engine, gasoline) | Vehicle description: passenger vehicles equipped with a 1.8 liter engine. The engine could stop running while being driven due to a defective crank position sensor. This could also result in the "service engine soon" warning light coming on or reduced engine power. | 103,000 |
| 01V-277 | August 29, 2001 | Wheels | Vehicle description: passenger vehicles. The cooling holes in the steel wheel may have burrs on their edges as a result of improper manufacturing. These burrs can cause cracks as the vehicle is being driven. Cracks can propagate between adjacent cooling holes. If enough cracks develop between the cooling holes, the… | 115,000 |
| 01V-174 | May 23, 2001 | Suspension (front, control arm, lower arm) | Vehicle description: passenger vehicles. One or more of the three bolts used to attach each front suspension lower control arm to the body on the left and right sides may not have been properly manufactured. | 101,000 |