2002 Nissan Sentra recalls
The 2002 Nissan Sentra is affected by 10 safety recall campaigns in NHTSA's records.
At a glance
- Recall campaigns
- 10
- Most recent
- December 1, 2020
Source: NHTSA recall records
Recall campaigns
| Campaign | Reported | Part | Problem | Vehicles |
|---|---|---|---|---|
| 20V-747 | December 1, 2020 | Air bags (frontal, passenger side, inflator module) | Nissan North America, Inc. (Nissan) is recalling certain 2002-2006 Sentra vehicles whose passenger air bags were previously inspected and may have been released without replacing the Takata air bag inflator. In the event of a crash, Takata frontal passenger air bag inflators may explode due to propellant degradation… | 3,930 |
| 20V-008 | January 9, 2020 | Air bags (frontal, passenger side, inflator module) | Nissan North America, Inc. (Nissan) is recalling certain 2001-2003 Maxima, 2002-2006 Sentra, 2002-2004 Pathfinder, 2007-2011 Versa Sedan and Versa Hatchback, 2001-2004 Infiniti I30 and I35, 2002-2003 Inifiniti QX4, 2003-2008 Infiniti FX35 and FX45 and 2006-2010 M35 and M45 vehicles. The vehicles are equipped with… | 307,962 |
| 15V-287 | May 15, 2015 | Air bags | Nissan North America, Inc. (Nissan) is recalling certain model year 2001-2003 Nissan Maxima, 2002-2004 Pathfinder, 2002-2006 Sentra, 2002-2003 Infiniti QX4 and I35, 2003 FX35 and FX45, and 2001 I30 vehicles. Upon deployment of the passenger side frontal air bag, excessive internal pressure may cause the inflator to… | 1,090,569 |
| 07V-527 | November 14, 2007 | Engine and engine cooling | On certain passenger vehicles equipped with a 2.5l engine, the crankshaft position sensor can overheat causing a brief interruption in the signal output from the sensor. | 653,910 |
| 03V-511 | December 10, 2003 | Engine and engine cooling | On certain electric vehicles, the front suspension transverse link's ball joint bracket may break from stress concentration at a notch created by surface roughness and the shape of the material cut-line. | 70 |
| 03V-455 | November 17, 2003 | Engine and engine cooling | On certain passenger vehicles, the circuit board for the crank position sensor or cam position sensor may have an improper solder joint due to solder deformation caused by heat stress accelerated by the existence of flux residue during the soldering process. | 630,000 |
| 03V-477 | November 14, 2003 | Electrical system (ignition, module) | On certain passenger vehicles equipped with the qg18de engine or qr25de engines, the foam material used for the interior lining of the electronic control module (ECM) box emits sulfur as it cures. | 276,000 |
| 03V-084 | March 11, 2003 | Engine and engine cooling (exhaust system, manifold/header/muffler/tail pipe) | On certain vehicles equipped with the 2.5 liter engine, the exhaust pipe hanger pin may catch debris from the road that could be ignited by contact with the main catalyst. Also on 2002 altima and sentra vehicles, certain engine operating conditions may cause the pre-catalyst to overheat and damage the catalyst… | 338,000 |
| 02V-056 | February 15, 2002 | Unknown or other | On some passenger vehicles equipped with a nissan-approved accessory floor mat that was installed either at the assembly plant or by the dealer, due to the length of the driver side floor mat, a small amount of mat movement could cause the mat to interfere with the accelerator pedal and not allow the pedal to release… | 9,640 |
| 01V-376 | December 12, 2001 | Exterior lighting (headlights) | Vehicle description: certain passenger vehicles fail to comply with requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these vehicles were missing tamperproof caps that prevent horizontal headlamp adjustment. | 81,393 |