1995 Saab 900 recalls
The 1995 Saab 900 is affected by 7 safety recall campaigns in NHTSA's records.
At a glance
- Recall campaigns
- 7
- Most recent
- November 14, 2002
Source: NHTSA recall records
Recall campaigns
| Campaign | Reported | Part | Problem | Vehicles |
|---|---|---|---|---|
| 02V-308 | November 14, 2002 | Air bags | On certain passenger vehicles, the air bag electronic control unit (ECU) is designed to sense and discriminate frontal impact events, command air bag and seat belt pretensioner deployments in a timely manner, and perform continuous diagnostics of the air bag system in the vehicle. Due to the possible insufficient… | 20,476 |
| 98V-038 | February 24, 1998 | Exterior lighting (headlights) | Vehicle description: passenger vehicles. The instructions for properly aiming the headlighting system were omitted. This does not meet the requirements of fmvss no. 108, "lamps, reflective devices, and associated equipment." | 92,505 |
| 97V-046 | March 21, 1997 | Vehicle speed control | Corrosion around the zinc-coated throttle control lever bushing can cause the throttle lever to bind. | 52,500 |
| 96V-008 | January 23, 1996 | Steering (steering wheel/handle bar) | The steering column shaft was incorrectly installed in the vehicle causing the column to be out of alignment. | 8,988 |
| 95V-066 | March 29, 1995 | Electrical system (ignition, module) | Upon startup, a voltage drop to the engine control module can cause a malfunction where engine speed fluctuates from 600 to 3,000 RPM for up to 30 seconds before normal engine idle of 900 RPM. | 5,383 |
| 95V-068 | March 29, 1995 | Power train (manual transmission) | It is possible to move the shift lever into the reverse gear position, remove the ignition key, and still have the transmission in neutral, or, to accidently disengage reverse by striking the gear lever. | 8,993 |
| 94V-226 | November 18, 1994 | Seats (front assembly, recliner) | One or more of the arc welds can be missing on the seat back frame recliner. | 10,584 |