1999 Volvo WG recalls
The 1999 Volvo WG is affected by 8 safety recall campaigns in NHTSA's records.
At a glance
- Recall campaigns
- 8
- Most recent
- September 9, 2002
Source: NHTSA recall records
Recall campaigns
| Campaign | Reported | Part | Problem | Vehicles |
|---|---|---|---|---|
| 02V-238 | September 9, 2002 | Exterior lighting (tail lights, switch) | Certain heavy duty class 8 trucks fail to comply with the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." the two tail lamps, back-up lamp,and license tag lamp were mounted on insufficiently rigid mounts. | 5,532 |
| 02V-037 | August 15, 2002 | Steering (linkages, tie rod assembly) | On some heavy duty class 8 vehicles equipped with arvinmeritor axle assemblies which may have been manufactured with trw model 20edl ball sockets, the tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications. | 19,915 |
| 01V-044 | May 8, 2001 | Steering (linkages, tie rod assembly) | Vehicle description: heavy duty, class 8, trucks equipped with tie rod assemblies containing 24-dl model ball sockets and manufactured by trw. Certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can lead to premature wear of the socket. | 760 |
| 01V-139 | November 20, 2000 | Steering (linkages, tie rod assembly) | Vehicle description: heavy duty class 8 vehicles equipped with arvinmeritor axle assemblies which may have been manufactured with trw model 20edl ball sockets. The tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications. | 13,373 |
| 00V-246 | October 24, 2000 | Steering (linkages) | Vehicle description: heavy duty trucks equipped with trw 20-edl ball-socket assemblies. Certain of the ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket. These bearings were produced between july 5 and october 3, 1999. | 730 |
| 00V-232 | August 22, 2000 | Service brakes, air (antilock) | Vehicle description: heavy duty trucks built with bendix air ABS with an ec-17 1030r electronic control unit (ECU), there have been reports of unwanted ABS activation at low speeds caused by 1) chafed ABS wheel speed sensor wires on rotating parts or 2) a damaged component at the wheel end that generates a certain… | 18,362 |
| 00V-012 | January 18, 2000 | Fuel system, gasoline (storage, tank assembly, filler pipe and cap) | Vehicle description: heavy duty trucks equipped with a steel fuel tank. The closure only fuel tank cap, installed on the steel fuel tank, failed when the tank was dropped from a 10' height as required by fmvss no. 393, "liquid fuel tanks." | 468 |
| 99V-055 | May 10, 1999 | Service brakes, air | Vehicle description: heavy duty trucks equipped with meritor air brake automatic slack adjusters. Some of the automatic slack adjusters had insufficient torque applied to the guide pawl cap screw. | 285 |