1991 Ford F-250 recalls
The 1991 Ford F-250 is affected by 5 safety recall campaigns in NHTSA's records.
At a glance
- Recall campaigns
- 5
- Most recent
- April 25, 1996
Source: NHTSA recall records
Recall campaigns
| Campaign | Reported | Part | Problem | Vehicles |
|---|---|---|---|---|
| 96V-071 | April 25, 1996 | Electrical system (ignition) | The ignition switch could experience an internal short circuit. | 7,900,000 |
| 94V-040 | February 23, 1994 | Fuel system, gasoline (delivery, hoses, lines/piping, and fittings) | The steel fuel return tubes that connect the frame fuel return lines with the engine fuel rail can contact the pinch weld flange connecting the dash panel to the floor pan. Continued contact leads to abrasion of the steel fuel return tube and eventually results in a fuel leak. | 89,770 |
| 93V-125 | August 2, 1993 | Fuel system, gasoline (storage, tank assembly) | A malfunctioning check valve within the fuel pump assembly causes a portion of the unused fuel from one tank to be returned to the second tank. When this occurs, the capacity of the second tank can be exceeded, causing fuel spillage. | 1,131,000 |
| 93V-066 | April 27, 1993 | Steering (steering wheel/handle bar) | Keys attached to the key ring of an ignition key while it is in the vehicle ignition can become lodged in the steering lock receiver as the steering wheel is being turned. | 2,419 |
| 92V-026 | March 3, 1992 | Service brakes, hydraulic (foundation components, drum, shoes/linings) | A revised brake lining noise insulator resulted in a decrease in the thermal insulation between the brake lining and the front brake caliper piston. This caused greater heat transfer to the caliper pistons with the potential to overheat the brake fluid and diminish brake effectiveness during severe braking conditions. | 467,000 |